UV shower coating Top-coat

Uses: surface coating of front board or side board of Solid wood or Veneer board sticking furniture

Construction method: shower coating

Construction procedure: Primer process and matte dedust → roller before shower → shower coating Top-coat → IR levelling → UV cured

Curing conditions: 65ºC×3-5min, 600-800j/cm².

Packing and storage: 20KG, Stored in a cool, dry and well-ventilated place; avoid direct sunlight and far away from fire. Shelf life is 6 months.

Precautions:

① stirred evenly before you use, remember to mix too many bubbles.

② heating tank UV shower coating Top-coat of about 4/5 tank, is insufficient to add, after adding warmed to reflux to carry out anti-foaming shower coating construction. Under normal circumstances can be heated after 0.5h after reflux, refluxed for 1h construction board can be poured. heating water temperature groove disposed 45-50ºC, in particular the outflow temperature control 35-40ºC

③ UV Primer degree of filling, sanding and dedust effect, plant cleaning status will affect the UV shower coating Top-coat paint film appearance.

④ UV Top-coat rework required, may be 400 # sandpaper grinding process or the use of UV repair water.

⑤ This product is flammable items, should pay attention to the fire, to keep construction ambient air circulation.

⑥ The product has a light cured properties, avoid direct sunlight during use.

⑦ Avoid contact with skin and eyes, if they inadvertently come into contact with skin and eyes, immediately rinse with plenty of water.