Water-based sealing Primer

Uses: dyeing of Solid wood or Veneer board sticking furniture, Bamboo and wood floor white board, can increase Adhesion; increase the Adhesion of UV Putty or UV Primer on white board.

Usage: after adding an appropriate amount of water-based color fine, sponge rollers for construction, with the brush machine and infrared drying equipment so that the coating is applied uniformly dyeing and drying.

Construction method: sponge roller roller paste or manually obliterated

Construction procedure: white boardsand polishing → water-based sealing Primer (DS-100) was added an appropriate amount of water-based color fine (with a sponge roller construction) → brush machine coating uniformity → infrared drying → UV transparent Putty → subsequent UV primer / Top -coat step

Drying control: the temperature of the infrared drying equipment is set at between 60-70ºC, Drying time for the 60-90S, when the room temperature is lower than 20ºC may be extended Drying time.

Packing and storage: 20KG, Stored in a cool, dry and well-ventilated place; avoid direct sunlight and far away from fire; Shelf life is 6 months..

Precautions:

① Before dyeing white board were construction, sand polishing process should be carried out, it will give more uniform dyeing.

To conduct the water sufficiently volatile after UV Putty or UV Primer of 's coating after ② dyeing, otherwise it will affect Adhesion.

③ Do not add oil dyeing agents to this product, add water and oil dual-use color fine can be the first to test the feasibility.

④ after some of the water during use volatile so viscosity increases can be added to a small amount of water or diluted industrial alcohol, but not excessive.

⑤ The product is also available in manual methods colroing.