UV3600vacuum plating Intermediate Coat

Description: UV3600 vacuum plating Intermediate Coat is a cost-effective UV products. Designed for plastic surface vacuum coating process developed. Application of the latest formation mechanism and special processing technology, and maintain a high yield. Recommendations and UV3200 and UV6300 series topcoats. Products applicable to ABS, PC, ABS + PC plastic substrate, the coating flexibility, adhesion and UV finish aluminum, tin, indium and indium-tin alloy good. Compliance with EU RoHS2002/95/EC directive.

Scope: apply to all types of high-end electronic products chassis plus UV coating vacuum coating the coating color.

Product composition: a photocurable polyurethane resin, a photoinitiator, a reactive diluent

Finished Size:

Appearance (visual): colorless transparent liquid

Viscosity (2# Iwata cup & 25ºC): 8.0-8.3s

UV Active ingredient: 28-32%

Technical Parameters:

Construction Technology: material - Clean → vacuum plating primer UV3200-UV curing (600-800mj/cm 2) → PVD coating - → vacuum plating Intermediate Coat UV3600 - UV curing (500-600mj/cm 2) ----- vacuum plating finish -UV curing → test and packaging.

Coating way: manual spray or spraying automatic production line

Thinner: spray directly

Precautions:

1, first Stir well before use

2, after opening the oil seal, attention away from ultraviolet radiation

3, the substrate surface stains should be cleaned before spraying to ensure adhesion coefficient

4, with a 300 mesh filter and then spraying

5, compressed air and a variety of instruments to be dry, clean

6, dust-free environment before spraying into the UV curing machine

Packing: 18KG/barrel

Security Code:

1, flammables, do not close the fire;

2, the construction, the coating must be maintained storage sites and coating properties of air circulation;

3, other usage guidelines, refer to "Material Safety Data Sheet."